The most common reason for a red light on the motherboard is that a piece of hardware (or more) is working incorrectly or is not connected correctly. However, depending on the motherboard type, the red light can mean a specific issue with the RAM or CPU. Diagnosing the root cause of that red illumination you …
Upgrading the motherboard is not a regular maintenance check, it is necessary only when you’ve authenticated it as the cause of some malfunctions within your computer. Every time I have had to replace a motherboard, these were the situations that necessitated the need to get a new motherboard: Nonetheless, This article is a comprehensive guide …
A hardware failure is the most common cause of orange light on most motherboards. A flashing orange light indicates a power supply problem, while a solid orange light indicates a RAM or other hardware problem or that it is not connected correctly. Check the power cable, the RAM, and other connected parts to find out …
On the LED debug display, “CPU DXE Initialization Is Started” is represented by a 63–67 error code. DXE is an abbreviation for Driver Execution Environment. It loads all of your system parameters into memory and initializes permanent memory. If you receive this error message during the boot process and your computer refuses to boot, it …
When you boot your computer, the most likely cause of the “No EFI System Partition Was Found” error message is that you accidentally deleted the EFI partition. You can fix the EFI partition by recreating it in Command Prompt or using a software tool designed for that purpose. You can also fix the EFI partition …
Your Corsair Vengeance XMP RAM won’t work because it wasn’t installed correctly or isn’t compatible with your motherboard and processor. Other possible causes include faulty memory modules, overheating, and power supply problems. Check the computer’s installation, BIOS settings, compatibility, and hardware parts to determine what’s wrong and make sure it’s getting enough power and cooling. …
ErP (Energy-related Products) mode is a power-saving mode found on some motherboard designs. It is also known as “ERP Lot 6” or “ERP Ready.” When this mode is turned on, the motherboard is made to use as little power as possible to meet the energy-efficiency computer standards set by the European Union. You can enable …
To find a USB 3.0 port on a motherboard, look for the blue USB header, check the labeling for “SS” or “USB 3.0,” check the manual, look near the front panel, PCIe slots, and RAM, or use a cable splitter to increase the number of available ports. These methods can help you find the USB …
The VDG is a three-pin connector that is intended for use with older Gigabyte and Aorus motherboards. This connector is not compatible with case fan headers, and attempting to connect a VDG cable to a case fan header will result in your RGB controller failing. It’s worth noting that most other brands use a four-pin …
If the boot system is legacy or BIOS, choose /dev/sda in the “Device for Boot Loader Installation” field. But if the boot system is UEFI, choose the partition called /dev/sda with the UEFI files. The number after the dot is the partition number for your situation. By looking at the column “Flags” and where the …
“Device For Boot Loader Installation” What’s The Best Option Read More »
