Base Memory 64K Address Check Error [Detailed-Guide]

Basic Memory 64K Address Check Error

AMI BIOS is a kind of BIOS that many motherboard manufacturers have started integrating into their systems. Some other manufacturers have even made BIOS similar to AMI BIOS. AMI BIOS is gradually taking over the motherboard market because of its great features.

One peculiar feature is the 3 beep codes that come with it. These beep codes help you know what can be wrong with your computer. They help you identify issues and fix them too.

We’ll spotlight one of the issues that the beep codes help us identify. This error is called the Base 64k Memory Error.

So, we will look at what this issue or error means. We will also consider what beep code helps us identify this issue. We will eventually also consider how we can fix this particular issue.

So, let’s get right into it.

What Does the Base 64K RAM Error Mean?

The Base 64K RAM Error means there has been a base memory or write test error in the first 64 KB block of memory. This error is usually an issue with the RAM stick. It is most likely a problem that has to do with the RAM stick not seating properly.

Usually, AMI BIOS beep codes are short and sound in quick succession. They usually make sounds once you have powered on your computer. Of those beep codes, three short beeps are what help us identify that there is a base 64k memory error. So, when you power on your computer and give out three short beeps, it is trying to alert you of a base 64k memory error.

Related: What is RMA Motherboard

How Can You Fix the Base 64k Memory Faliure Issue?

Replacing the RAM is the most likely option many people decide on with this error. Although, the issue could stretch beyond the RAM. You might have to replace the memory controller and maybe your motherboard too.

So, let’s see how to resolve the issue in detail.

Fix 1: Remove Added Memory

The first point of the call will be to remove the added memory. A base 64K memory error could have been caused by the fact that you recently removed or added more memory to your computer. You will likely start getting the beep codes once you power your computer.

So, all you have to do is remove the memory you just added to your computer. Then, see if your computer system works out just fine. If it does, it means that the memory you removed is defective. It might also be that it is not compatible with your motherboard.

Fix 2: Reseat Memory

You can also try opening your computer and properly reseat the memory. If you move your computer frequently, it can be a major source of this issue. What happens is that as a result of being moved consistently, the memory stick can become loose. This causes an error for your computer when it reads the memory stick.

This issue can be fixed by opening up your computer. You can try removing all the memory sticks and checking the ports carefully. Then, reseat the sticks and ensure that they are fitted in place.

Fix 3: Reboot PC

Rebooting the computer is another option you want to try. So, try restarting your computer two or three times. It could be that your computer is having difficulty reading the memory sticks at first. This is typical of some computers.

If this works fine, then your computer just had difficulty in processing. However, the problem can escalate to the point where you must constantly restart your computer. If you are experiencing this, your memory stick is incompatible with your computer.

You might just have to replace the memory stick entirely.

Fix 4: Swap RAM Location

If reseating the memory did not get your computer up and running, you can try other memory slots. You can work around swapping the location of the memory. If you work with a single stick of memory, then change the location. Boot your computer now and see what happens.

If you have more than one stick of memory, then remove all the memory sticks. Although, you should leave one memory stick in the slot. You can boot your computer now and see if this resolves the issue. If it does not, remove that stick of memory and try out other sticks.

Try this same process for other sticks of memory. It could help you see if a memory stick is faulty or incompatible. So, you can replace the faulty memory stick. Your computer should boot up without issues.

Fix 5: Replace The RAM

For this final step, you will need another computer system. If you have access to a computer that uses a similar memory stick, then you can try this hack out. You will take that memory and install it on your computer. You must ensure to take out all the memory sticks of your computer, though.

If this other computer’s memory works out, your memory stick is faulty. If the memory does not work out, check if it is compatible with your motherboard. If it is compatible, the most probable issue is your motherboard.

It could mean that your motherboard is faulty. The issue could also be with your memory slots. The memory slots may have been affected and picked up a fault. You will need to get a new motherboard to solve this issue.

Sometimes, the issue is most likely with your memory stick. So, all you have to do is replace it. Something worthy of note is that the steps we have highlighted involve removing physical parts from your computer.

While you are doing this, ensure you take the necessary precautions. You have to be aware of electrostatic discharge and the hazards it could pose. This can damage your computer if you are not very careful. So, these steps require that every necessary precaution be taken.

Related: How Many Sata Ports do You Need

Base 64k RAM Failure Meaning and Fix

You will hear three beeps when you have a 64K RAM failure. This is caused by a failure within the first 64 KB of system memory. The first bank of memory most likely contains a faulty memory chip. It’s possible that there’s a problem with the motherboard or a system device.

First Fix

Unplug the computer from the wall and press/hold the power button on the tower for 15 seconds. Remove all dust from the case and carefully reseat the RAM modules in their slots. The module’s first 64K are located in slot 1.

If it does not boot, unplug it and press the power button again. Remove the module from slot 1 and replace it with the module from slot 2, leaving the second slot empty. If it boots, the first RAM module is faulty and must be replaced.

Second Fix

Typically, replacing the RAM resolves the problem, but if the memory controller is faulty, the motherboard must be replaced.

What is memory failure in A computer?

When a computer suffers from memory failure, it means that its memory can no longer retain data as it should. This can occur due to various factors, such as hardware malfunctions, software bugs, or electrical interference.

Causes Of Memory Failure

Hardware failures can cause memory failures: This can damage the physical components of the computer’s memory, such as memory chips or the circuit board that connects them. Power surges, physical impacts, and the excessive heat can all cause this type of damage. In contrast, software bugs can cause memory failure by interfering with managing the computer’s memory.

A bug in the operating system or a program running on the computer: This may cause the computer to improperly access or manipulate memory, resulting in data corruption or loss.

Electrical interference: This disrupts the flow of electrical signals within the computer’s memory and can also cause memory failure. This can be caused by electromagnetic radiation from other electronic devices or static electricity accumulating on the computer’s components.

Regardless of the cause, memory failure can have serious consequences for a computer. It can cause the computer to crash or behave erratically and cause the loss of critical data. Make regular backups of your data to avoid memory failure and keep your computer’s hardware and software up-to-date.

How To Fix Memory Failure

There are a few different ways to fix memory failure in a computer, depending on the underlying cause of the problem. Some potential solutions include:

  1. Restarting the computer: Simply restarting the computer may help resolve memory failure in some cases. This will remove any temporary errors or bugs causing the issue and reset the computer’s memory.
  2. Running a memory test: Most computers include a memory testing utility that can assist you in diagnosing and repairing memory failure. This utility will run a series of memory tests on your computer to look for errors or other issues. If it discovers any problems, it may be able to fix them automatically or provide instructions on how to do so manually.
  3. Updating the computer’s software: If the memory failure results from a software bug, updating the computer’s operating system and other software may help resolve the issue. Because newer software versions are frequently designed to fix bugs and improve performance, updating your software can prevent memory failure.
  4. Replacing faulty hardware: If the memory failure results from faulty hardware, replacing the faulty hardware may be the best solution. This could entail replacing memory chips, the circuit board that connects them, or other hardware components. If you are unfamiliar with computer hardware, it is best to seek professional assistance to ensure the replacement is completed correctly.
  5. Backing up your data: Finally, It is essential to back up your data regularly to protect against memory failure. This allows you to restore your data if your memory fails and can help you avoid losing important information. Depending on your preferences and needs, you can back up your data to an external hard drive, a cloud storage service, or other media.


The base 64k memory error is not uncommon. Several people have experienced this issue. It usually occurs while booting your computer. If you boot your computer and it gives three short beep codes, it indicates this error.

We have carefully shown you how to resolve this error. Your computer should not have any issues if you follow the steps we have highlighted.

So, go get your computer up and running.

About The Author

Scroll to Top