Yes, a blown power supply can damage the motherboard. The power consumption of your motherboard ranges between 50 and 150 watts, the processor requires between 80 and 140 watts of power, and the GPU requires approximately 150 – 220 watts; if the PSU surges and provides more or less power than these components require, they […]
Can A Blown Power Supply Damage A Motherboard? Read More »
The BIOS is probably not set up correctly if your motherboard is brand new and can’t detect bootable devices. The BIOS is a set of setup instructions used by the computer. The BIOS must be changed when a new motherboard is installed. A bootable device is a storage device from which a computer can start
New Motherboard Can’t Find Bootable Devices (Fixed) Read More »
If you are not overclocking your PC, the VRM does not need to be cooled. The average operating temperature of a CPU’s VRM should be between 80°C and 100°C. A GPU’s VRM temperature frequently exceeds 120 °C. The voltage regulator module regulates the electricity sent to the GPU or CPU, protecting your system from high
Do Motherboard VRM Need Cooling? (All The Facts) Read More »
The Most Common Reason A New Motherboard May Be Unable To Connect To The Internet Is That The Drivers Have Not Been Installed Or Have Not Been Installed Correctly. Another Possibility Is That The Motherboard Is Incompatible With The Computer’s Operating System. But You Can Make It Better! You are not alone if you have
New Motherboard Can’t Connect To The Internet (Fixed) Read More »
MSI motherboards have different beep codes that show problems that need to be fixed immediately to prevent more problems. Troubleshooting these MSI motherboard beep codes is the best way to keep your computer from being damaged, and I will go over each code and how to troubleshoot it. One of the most important things you
Motherboard Beep Codes MSI Read More »
The most common ASRock Motherboard beep codes are a single short beep indicating a normal system boot, continuous short beeps indicating a power error or loose power connection, continuous long beeps signaling a RAM error, and a combination of short and long beeps indicating a VGA card error. These beep codes serve as audio indicators
ASRock Motherboard Beep Codes Read More »
The most common gigabyte beep codes include 1 short beep for a normal POST, 2 short beeps for a CMOS error, 1 long beep and 1 short beep for a memory error, 1 long beep and 2 short beeps for a graphics card error, and 1 long beep and 3 short beeps for an AGP
How To Fix Gigabyte Motherboard Beep Codes Read More »
Yes, you can clean your motherboard with methylated spirits. Methylated spirit is a mixture of 95% ethanol and 5% methanol. If used carefully, it can clean tough stains off of circuit boards. But it would help if you were careful when you cleaned with methylated spirits so you didn’t hurt your motherboard. Even though liquids
Can You Clean Your Motherboard With Methylated Spirits? Read More »
If you are looking for an answer to the question, this blog post will answer all your questions and will show you how to prevent your motherboard from damaging your PSU or your PSU from damaging your motherboard. So, read on. Is it possible for a motherboard to damage a power supply, VGA and Ram?
Can a motherboard damage a power supply unit (PSU)? Read More »
If you want to test your motherboard without HDD, you can do it without damaging it as long as your Processor is well placed on the motherboard. This post will explain everything you need to know about testing your motherboard without HDD or SSD. The hard disk drive (HDD) is not required to test the
Can I Test the Motherboard Without HDD? Read More »
