A memory refresh timer error occurs when the computer fails to refresh DRAM cells within a specified period. It can be caused by issues like corrupted RAM, motherboard or BIOS problems, overheating, or power supply issues. To fix it, run a memory diagnostic tool, update the BIOS, check for overheating, ensure sufficient power supply, and …
To enable Precision Boost Overdrive (PBO) on an MSI motherboard, first enter the BIOS, navigate to the “OC” or “Overclocking” menu, and look for the PBO option. Enable it and adjust the settings to your preference. Save your changes and exit the BIOS to activate PBO. Precision Boost Overdrive is AMD’s automatic “overclocking” system that …
The COM1 port on a motherboard is a serial communication port used for connecting various peripheral devices to a computer. It is typically labeled as a 9-pin male connector and can be used for communication with devices such as modems, mice, and printers. The port is usually located at the back of the computer and …
The boot light on your motherboard means that there’s a problem with your boot drive (HDD or SSD). In other words, your motherboard reached the point where it tried booting into Windows off of your boot drive and failed. Perhaps you were starting your computer, and it then got stuck on the boot light after …
The most common cause of DRAM refresh failure is overheating, which can be prevented by ensuring proper cooling. Other causes include outdated BIOS, faulty RAM modules, or power supply issues. Fixing it involves resetting the BIOS, checking for loose connections, replacing faulty RAM modules, or upgrading the power supply if necessary. The DRAM (Dynamic Random …
A green light on the motherboard indicates that it is receiving power from the power supply; on most motherboards, this light is usually located near the power connector. However, it does not guarantee that the motherboard is functioning properly, as other components could prevent the system from booting up. If you have just finished your …
The SPDIF/OUT header on a motherboard is a connection point for a S/PDIF (Sony/Philips Digital Interface) audio cable. This header lets the motherboard send high-quality digital audio to an external audio device, like a home theater receiver or a digital sound system. In other words, S/PDIF means digital audio. So if you had an audio …
CSM stands for Compatibility Support Module, and it is a feature in BIOS (Basic Input/Output System) that provides backward compatibility for older operating systems and software that were not designed to work with the newer UEFI (Unified Extensible Firmware Interface) standard. The CSM option allows a system to boot in Legacy BIOS mode, emulating the …
Yes! A new motherboard will come with 2 SATA cables, which are for connecting hard drives or solid-state drives, and, occasionally, an I/O shield for the case’s back. Other cables, like monitor cables, power supply cables, and peripheral cables, are often not included and must be bought separately. Not only do motherboards come with cables, …
Do Motherboards Come with Cables? [detailed-Guide] Read More »
Yes, a PCIe 3.0 card can be used in a PCIe 2.0 slot, though there may be some limitations. PCIe 3.0 is backward compatible with PCIe 2.0, which means that a PCIe 3.0 card can be inserted into a PCIe 2.0 slot and will work, although at a reduced performance level. This is because the …
