When you boot your computer, the most likely cause of the “No EFI System Partition Was Found” error message is that you accidentally deleted the EFI partition. You can fix the EFI partition by recreating it in Command Prompt or using a software tool designed for that purpose. You can also fix the EFI partition […]
“No EFI System Partition Was Found”: FIXED Read More »
The most common causes of an Asus motherboard’s orange light with no boot are improperly installed RAM, an unstable power supply, loosely connected cables, damaged parts, or even a faulty CPU. This can be solved using either hardware or software troubleshooting, as I will explain in this article. The orange light you see on your
Asus Motherboard Orange Light No Boot: Fixed Read More »
When your Asus motherboard doesn’t recognize SSDs and hard drives as bootable devices, it’s probably because the boot menu has the wrong settings. The common solution is to change a setting in the UEFI/BIOS about the SSD in “Legacy” mode. Then, it will be recognized, and Windows will boot up. Typically, in the boot menu,
Asus Motherboard Not Booting SSD: Causes and Fixes Read More »
Asus motherboards display a green light and refuse to turn on when there is a problem with power connections and peripheral devices or when you must install Windows first. While there are other technical causes, the first port of call towards fixing this issue is to check all power connections to all components, experiment with
Asus Motherboard Green Light: FIXED Read More »
Nahimic initialization failure is a common challenge, especially after every Windows or driver update. Thus, you may get the error message that reads, “Nahimic cannot be used However, issues of support and compatibility could also be the culprit. While there is no singular fix for this problem, many users have solved it by either restarting
Nahimic Cannot Be Used (Why & Fix) Read More »
Despite the overwhelming popularity of DDR4 or DDR5, using DDR3 RAM is not a bad idea. DDR3 RAM is not as fast and has a lower bandwidth than newer models like DDR5, but it has low latency and costs less than newer models like DDR5. As you already know, this kind of computer memory is
Is DDR3 Still Good? (for gaming, crypto mining, and editing) Read More »
JFP2 headers are typically found on the front panel of pin-equipped motherboards. Its main jobs are to give the device power, reset the device, and control the LED lights on the unit. Sometimes a motherboard will have a speaker or buzzer jack labeled JFP2. I was previously using the MSI H110M and the Intel i3
What Is JFP2 on Motherboard? how To Use It Read More »
Many cases of MSI battery calibration not working occur following a Windows 10 upgrade. The most common solution is to uninstall the old MSI Battery Calibration app and install the latest version, which works with Windows 10 and 11. You can download the latest version of the MSI Battery Calibration v1.0.1505.2901 here. Continue reading to find
MSI Battery Calibration Not Working (Why & Fixes) Read More »
JCOM1 is a serial port device connector with 9 pins. It is usually found in the bottom right corner of older motherboards and is used to connect various peripheral devices to the motherboard. If you are thinking of using the serial port for a specific purpose, such as connecting to a device that only has
What Is JCOM1 On Motherboard? How to Use It Read More »
The best Asus water-cooled motherboard should have a strong water-cooling system, high-quality parts, and reliable performance. The famous ASUS ROG Maximus XIII Extreme Glacial tops many recommendation lists, but there are better options depending on your gaming needs. As you know, Asus is a well-known and respected brand in the computer hardware industry. While their
5 Best Asus Water-Cooled Motherboards Read More »
