To find a USB 3.0 port on a motherboard, look for the blue USB header, check the labeling for “SS” or “USB 3.0,” check the manual, look near the front panel, PCIe slots, and RAM, or use a cable splitter to increase the number of available ports. These methods can help you find the USB […]
Where and how To Find USB 3.0 on a motherboard? Read More »
The most common causes of a lack of display on an ASRock motherboard include incorrectly connected cables and an improperly seated or faulty graphics card or RAM. Check that the display and power cables are securely connected to diagnose the issue. It may be necessary to reset the BIOS or contact a technician for assistance.
ASRock Motherboard No Display Read More »
If your Gigabyte motherboard is stuck on the splash screen, it is caused by faulty memory slots or RAM, a corrupt BIOS, an incorrect boot order, or CMOS problems. Check that all the connections are secure, and then reset the CMOS to clear any custom settings and return the motherboard to its factory settings. I
Gigabyte Motherboard Stuck On Splash Screen: FIXED Read More »
A red light on the ASRock motherboard means a problem with the internal motherboard hardware or power inside the computer. A red light near the BOOT indicator may indicate a problem with the boot devices, such as the hard drive. Like all other motherboards, the ASRock motherboard is equipped with LED indicators to inform you
ASRock Motherboard Red Light: Fixed Read More »
The VDG is a three-pin connector that is intended for use with older Gigabyte and Aorus motherboards. This connector is not compatible with case fan headers, and attempting to connect a VDG cable to a case fan header will result in your RGB controller failing. It’s worth noting that most other brands use a four-pin
Where Do You Connect VDG Cable On Motherboard? Read More »
If the boot system is legacy or BIOS, choose /dev/sda in the “Device for Boot Loader Installation” field. But if the boot system is UEFI, choose the partition called /dev/sda with the UEFI files. The number after the dot is the partition number for your situation. By looking at the column “Flags” and where the
“Device For Boot Loader Installation” What’s The Best Option Read More »
2666MHz of RAM is good for Intel CPUs. While an AMD CPU will work much better with faster RAM (3200 MHz or better), a computer with 2666MHz of RAM may be sufficient for general computing and light gaming. Still, running heavy games, video editing, or multiple applications simultaneously may require higher-performance RAM to get the
Is 2666MHZ RAM Good? Read More »
No matter what brand of motherboard you have, if the A0 LED code shows up, it means that “IDE initialization is started.” It indicates that the motherboard has handed over hardware control to the operating system. In other words, your computer is up and running. However, many people have reported that they see the A0
“IDE Initialization Is Started” on Motherboards Read More »
A0 Code on your motherboard means that IDE initialization has started. This usually means that the system has passed control from the BIOS to the operating system, which means it has booted successfully. The system would usually settle on an A0 code after flashing through many different numbers as a sign that it had booted
A0 Motherboard Code: What It Means Read More »
If you have the option of using Legacy or UEFI to configure boot storage boot option control, the boot option is affected by how your drive was initialized. If it’s a GPT drive, go with UEFI; if it’s an MBR drive, go with Legacy. The way the firmware finds the boot target is the main
Setting Storage Boot Option Control: Legacy or UEFI? Read More »
