Troubleshooting

On the LED debug display, “CPU DXE Initialization Is Started” is represented by a 63–67 error code. DXE is an abbreviation for Driver Execution Environment. It loads all of your system parameters into memory and initializes permanent memory. If you receive this error message during the boot process and your computer refuses to boot, it […]

When you boot your computer, the most likely cause of the “No EFI System Partition Was Found” error message is that you accidentally deleted the EFI partition. You can fix the EFI partition by recreating it in Command Prompt or using a software tool designed for that purpose. You can also fix the EFI partition

Your Corsair Vengeance XMP RAM won’t work because it wasn’t installed correctly or isn’t compatible with your motherboard and processor. Other possible causes include faulty memory modules, overheating, and power supply problems. Check the computer’s installation, BIOS settings, compatibility, and hardware parts to determine what’s wrong and make sure it’s getting enough power and cooling.

ErP (Energy-related Products) mode is a power-saving mode found on some motherboard designs. It is also known as “ERP Lot 6” or “ERP Ready.” When this mode is turned on, the motherboard is made to use as little power as possible to meet the energy-efficiency computer standards set by the European Union. You can enable

To find a USB 3.0 port on a motherboard, look for the blue USB header, check the labeling for “SS” or “USB 3.0,” check the manual, look near the front panel, PCIe slots, and RAM, or use a cable splitter to increase the number of available ports. These methods can help you find the USB

The VDG is a three-pin connector that is intended for use with older Gigabyte and Aorus motherboards. This connector is not compatible with case fan headers, and attempting to connect a VDG cable to a case fan header will result in your RGB controller failing. It’s worth noting that most other brands use a four-pin

If the boot system is legacy or BIOS, choose /dev/sda in the “Device for Boot Loader Installation” field. But if the boot system is UEFI, choose the partition called /dev/sda with the UEFI files. The number after the dot is the partition number for your situation. By looking at the column “Flags” and where the

2666MHz of RAM is good for Intel CPUs. While an AMD CPU will work much better with faster RAM (3200 MHz or better), a computer with 2666MHz of RAM may be sufficient for general computing and light gaming. Still, running heavy games, video editing, or multiple applications simultaneously may require higher-performance RAM to get the

No matter what brand of motherboard you have, if the A0 LED code shows up, it means that “IDE initialization is started.” It indicates that the motherboard has handed over hardware control to the operating system. In other words, your computer is up and running. However, many people have reported that they see the A0

A0 Code on your motherboard means that IDE initialization has started. This usually means that the system has passed control from the BIOS to the operating system, which means it has booted successfully. The system would usually settle on an A0 code after flashing through many different numbers as a sign that it had booted